Gentoo Wiki ArchivesGentoo Wiki

HOWTO_Setup_MythTV/Hauppauge_mythtv_lircrc

<- Go back to HOWTO Setup MythTV

A free tool for configuring remotes for LIRC/MythTV can be found at http://lircconfig.commandir.com/.

File: ~/.mythtv/lircrc
begin
    prog = mythtv
    button = Off
    config = Esc
end

begin
    prog = mythtv
    button = Go
# Swap the PiP windows
    config = N
end

begin
    prog = mythtv
    button = 1
    config = 1
end

begin
    prog = mythtv
    button = 2
    config = 2
end

begin
    prog = mythtv
    button = 3
    config = 3
end

begin
    prog = mythtv
    button = 4
    config = 4
end

begin
    prog = mythtv
    button = 5
    config = 5
end

begin
    prog = mythtv
    button = 6
    config = 6
end

begin
    prog = mythtv
    button = 7
    config = 7
end

begin
    prog = mythtv
    button = 8
    config = 8
end

begin
    prog = mythtv
    button = 9
    config = 9
end

begin
    prog = mythtv
    button = Back/Exit
    config = Esc
end

begin
    prog = mythtv
    button = 0
    config = 0
end

begin
    prog = mythtv
    button = Menu
    config = M
end

# Below are keys used with the Hauppauge Grey remote

begin
   prog = mythtv
# This is the Red key
# We'll use it for "Delete"
   button = Red
   config = D
end

begin
   prog = mythtv
# This is the Green key
# We'll use it for "Information"
   button = Green
   config = I
end

# Note the "repeat =" strings in the volume and channel.
# This means that if you hold down the key, every nth instance will be
# passed.  This depends on your system, so you may want to increase or
# decrease this and see what happens.  repeat = 1 is probably too
# fast.

begin
  prog = mythtv
# This is the Yellow key
# Use it as a volume key
  button = Yellow
  repeat = 3
  config = F10
end

begin
  prog = mythtv
# This is the Blue key
# Use it as a volume key
  button = Blue
  repeat = 3
  config = F11
end

begin
    prog = mythtv
    button = Ch+
# This is the "up" on the central diamond
    repeat = 3
    config = Up
end

begin
    prog = mythtv
    button = Ch-
# This is the "down" on the central diamond
    repeat = 3
    config = Down
end

begin
    prog = mythtv
    button = Vol-
# This is the "left" on the central diamond
    repeat = 3
    config = Left
end

begin
    prog = mythtv
    button = Vol+
# This is the "right" on the central diamond
    repeat = 3
    config = Right
end

begin
    prog = mythtv
# Middle button on the diamond
    button = Ok
    config = Return
end

begin
    prog = mythtv
    button = Mute
    config = F9
end

begin
   prog = mythtv
# Change focus for PiP (to change channel in the other window)
   button = Blank
   config = B
end

begin
   prog = mythtv
# Toggle PiP on/off
   button = Full
   config = V
end

begin
    prog = mythtv
    button = Rew
    config = Left
end

begin
    prog = mythtv
    button = Play
    config = P
end

begin
    prog = mythtv
    button = FFW
    config = Right
end

begin
  prog = mythtv
  button = Record
  config = R
end

begin
   prog = mythtv
# Teletext
   button = Stop
   config = T
end

begin
    prog = mythtv
    button = pause
    config = P
end

begin
   prog = mythtv
   button = Replay
# Use for backwards commercial skip
    config = Q
end

begin
   prog = mythtv
   button = Skip
# Use for forward commercial skip
    config = Z
end
Retrieved from "http://www.gentoo-wiki.info/HOWTO_Setup_MythTV/Hauppauge_mythtv_lircrc"

Last modified: Sun, 31 Aug 2008 06:29:00 +1000 Hits: 10,820

Created by NickStallman.net, Luxury Homes Australia
Real estate agents should list their apartments, townhouses and units in Australia.